batch type powder coating plant
A complete range of uniquely designed modular Powder Coating Booth and systems for both manual and fully automatic coating applications. We have several years’ experience in the design, manufacture, installation, commissioning and service support of powder coating systems and equipment. We have various Powder Coating Booths models along with a wide range of Powder Coating Ovens. We have expertise in multicyclone recovery systems, these booths give maximum recovery of over sprayed powder. In the cartridge type Booth, recovery can be almost 99%. Our design ensures almost zeropowder flow from the cut-outs. The ductless construction ensures minimum cleaning time. This is aided by the trough design which makes optimal use of the angle of repose. Wherever needed, the roll-in-roll out mechanism can further optimise the cleaning time. This mechanism is available in both, manual as well as motorised modes.
Features:
- Batch type powder coating booth with Multicyclone recovery system.
- Bag filter & cartridge filter options available.
- Powder curing ovens with electrical, oil fired & gas fired heating options are available.
- Conveyor track and trolley (manual) for material handling as an option.
Offered powder coating plant include:
- Electrostatic Powder Coating Gun
- Powder Recovery Booth
- Powder Curing Oven for oven
- Heavy Duty Trolley with Track
- Overhead Trolley with Track (If required)
Power Source Options:
- Main Power Supplies 415 Volt, 50 Hz, 3 phases, 4 wire A.C. system only.
Heat Sources:
- Electric
- Gas (Natural or LPG)
- Fuel Oil
- Steam
- Other Fuel Mixtures
Specifications
- Ensure powder recovery up to 95-96 % depending on particle size distribution in the powder
- The powder coating booth enclosure is made from 18 SWG GI Sheets.
- The cyclone recovery unit couples to a powder coating booth by a joint powder suction ducting.
- The cyclone made from 18 SWG GI Sheets and the cyclone stand made from heavy duty angle.
- The closed Sheet Steel enclosure system calls a bag filter. We recommend the powder collection unit fitted after the cyclone recovery unit.
- It is controlled to spread out the powder in air which is powdered throughout by the cyclone.
- Access to the interior of the oven, fan, and heating chamber
- Temperature Ranges up to 250°C.
