Plastic components painting line


Several automotive parts like bumpers, mirror housing, car light housings, etc. are painted in different colours to match the shade of the original vehicle. Also cell phones, laptops, computer peripherals etc., are very popular to use special coating technology on plastic parts. There are different types of plastics and the choice of the painting process depends on end use requirements and the type of plastics.  

The painting process includes conductive primer, flash-off, base coat, flash-off, clear coat, flash-off, oven for paint drying, cooling etc. The most important aspect of the Plastic Painting process is to maintain temperature and humidity level within the tolerance limit acceptable to the paint being used. Dust level control is another most important aspect for Plastic Painting Lines. 


  • Heavy Duty Construction
  • Low Maintenance
  • Easy to Assemble
  • Re-circulates Shop air

Power Source Options

  • Main Power Supplies  415 Volt, 50 Hz, 3 phases, 4 wire A.C. system only.

Heat Sources

  •  Electric
  •  Gas (Natural or LPG)
  •  Fuel Oil
  •  Steam
  •  Other Fuel Mixtures


  • Booth canopy is made from 1.2 mm thick GI joint sheet metal panels.
  • Water Screen is made from 1.6 mm thick Stainless Steel 304 grade sheet.
  • Baffles made from 1.2 mm thick GI sheet metal panels.
  • Maintenance door is bolted.
  • Water collection tank is made from 2 mm thick SS 304 sheet with suitable angle iron stiffening.
  • Modular design ensures easy installation and expansion.
  • ALL MS Parts are Two coats of epoxy primer and two coats of enamel finish paint.
  • ALL GI Parts are All GI Panels are Powder Coated.
  • Access to the interior of the oven, fan, and heating chamber
  • Temperature Ranges up to 200°C or as per requirement.

Customised option available as per customer requirement.