Dust free pressurized paint booth


Dust Free Paint Booth can be also termed as Dust free painting. Dust is one of the major problems in all modern paint shops and these can be a serious issue resulting in higher rejection. In India, due to Dusty Environment & poor equipment design & poor process selection & lack of housekeeping as well as maintenance. Rejection due to dust in painting is higher & higher beyond imagination. Recurring rework cost for rejected components due to dust in paint shops is a major headache.

During painting excessive paint dust inhales by the painter and workers in the surroundings and it can cause headaches, dizziness, and nausea. So we need to extract the excess fumes and dust during the painting process. Cleantek manufactures two different models in paint booths such as wet paint Booth & Dry paint booth. 


  • Furniture industry for painting of assembled wardrobes & assembled beds etc
  • Automobile sector for painting of cars , buses , trucks , locomotives , railways etc
  • Fabrication industry for painting of Gas chambers , large oil vessels , large water tankers etc
  • Construction field for painting of Concrete vessels , large pipe lines & structures etc
  • Aerospace field for painting of air crafts , aeroplanes , helicopters etc
  • Alternative power industry for painting of transformers , generators , windmill blades , alternators etc. 


  • No filters to replace.  
  • Complies with all current safety and environmental legislation. 
  • Fully modular construction. 
  •  Belt drive fan(s) with external motor(s). 
  •  Choice of flameproof fans.
  •  Water curtains of stainless steel. 
  •  Simple maintenance by removing clipped in front panel. 
  •  Heavy duty centrifugal pump with tungsten seals.
  •  Supplied complete with loose starters, all chemicals, all sealants and fixings.
  • Ductwork and full installation service available.


  • Booth canopy is made from 1.2 mm thick GI joint sheet metal panels.
  • Water Screen is made from 1.6 mm thick Stainless Steel 304 grade sheet.
  • Baffles made from 1.2 mm thick GI sheet metal panels.
  • Maintenance door is bolted.
  • Water collection tank is made from 2 mm thick SS 304 sheet with suitable angle iron stiffening.
  • Modular design ensures easy installation and expansion.
  • ALL MS Parts are Two coats of epoxy primer and two coats of enamel finish paint.
  • ALL GI Parts are All GI Panels are Powder Coated.

Customised option available as per customer requirement.